Solar Panel Grid Revit Family Free Download UPDATED

Solar Panel Grid Revit Family Free Download

Like most things in Revit, there are many ways to achieve a desired consequence. Take mitered axle joints for example. Modelling precast panels is another prime example of this. A lot of buildings I work on have precast panels, and its my job every bit a structural draughtsman to model and ready-out each panel. Sometimes this is quite straightforward and each console is adequately rectangular and uniform, simply sometimes the panels tin can exist quite complex with lots of voids and steps. This blog post volition look to explain the pros and cons of each of the methods we tin utilize to model precast panels in Revit.

Revit Precast Panels using Split up with Gap (Disallow joins)

Usually we volition model a precast wall equally continuous, and as we progress to developed or detailed design we will begin to split up the precast wall into private panels. An easy fashion to do this is to apply the Split with Gap tool. This tin can be found on the Alter tab. All we do is just specify the Articulation gap dimension, then click on the location on the precast wall we want to split.

At wall joins, you tin employ "Disallow Joins" to carve up the panels at corners. Only right click on the end of the wall (in plan) and select Disallow Bring together. This stops the walls from wanting to  join together.

Pros:

It'southward very easy, creates accurate gap dimensions, each panel is a dissever wall (useful for tagging individual panels), Vertical and horizontal split,

Cons:

Really merely useful for simple panels,

---

Revit Precast Panels using Reveals

To model precast panels using Reveals, we need to be in a section or pinnacle view. On the structure tab, click the drop down on the Wall push and select Wall:Reveal.

Next cullhorizontal or vertical placement, so click on the wall in the location where yous want the articulation. Select the Wall sweep yous merely fabricated and edit the type properties. Here you can cull a profile for your panel joints.

To create this profile, offset with the "Profile" family template.

Pros:

Very easy to do, create accurate gap dimensions and profiles, Both vertical and horizontal joints

Cons:

You have to create a contour (actress pace), One continuous wall so can't tag each panel

---

Revit Precast Panels using Parts

Creating Precast panels using Parts is quite unique, as the Wall remains the aforementioned – but in each view you lot can choose to evidence the parts(panels) you lot create or the original wall.

Outset off, select your Precast wall then click the Parts buttonunder Create on the Change Walls Tab:

Next, click on Carve up Parts then Edit Sketch.Hither you tin sketch in the location of your panel joints (sketch between the bluish dashed lines):

In the backdrop bar, you lot have the option to apply a Gap dimension to each joint, and/or utilize a profile:

To create this profile family start with the "Partitioning Profile" family template.

Don't forget to specify in each view whether you want to show the Parts(panels), show the original Wall, or evidence both:

Pros:

It's fairly easy, Creates authentic gap dimensions, Can use gap profiles, You lot tin can tag parts (each panel), Each panel has its own shape handle and so tin can be different thickness etc.

Cons:

Have to specify the Visibility of Parts in each view,

---

Revit Precast Panels using Mantle walls

To use this method you demand to create a Precast Curtain wall. Ready the curtain panel to be a precast wall (or just a physical wall with the correct thickness).

Yous can then gear up the vertical and horizontal grids however you wish. For instance, if you lot need the panels to be a maximum 2.4m wide you lot would change the vertical grid layout to "maximum spacing" and the spacing to "two.4m". Now when you model your wall each console will be of equal width no greater than 2.4m wide. Alternatively, you can just use the Curtain Grid tool to specify your own Grids.

To make the joints, create a Drape Wall Mullion with the width being the required gap dimension. Simply Hibernate the Curtain Wall Mullions in your view and you lot will be left with only the panels with right gaps. You can use edit profile to create voids or different wall profiles.

Pros:

Fairly like shooting fish in a barrel to set-upwardly, Create accurate gap dimensions, Tin can set fixed number or maximum width for panels, Yous tin can tag individual panels (drapery console tag), You tin can use wall openings or edit profile to create voids,

Cons:

Console gap is actually a Curtain Wall Mullion which you have to hide, You can't model Reinforcement in Panels

---

Revit Precast Panels using Voids

I use this method for complex panels. Essentially you accept ane Precast wall, and create one in-identify Void which represents every opening.

We do this past by creating a 'Modelin-place component',establish on the Construction Tab on the Component driblet down:

Next select a category (I usually use Generic Model or Wall), and give it a name (I normally call information technology "Filigree (whatever) PC Openings")

Now we are all set-up, in an Tiptop or Department view create a Void extrusion:

Sketch in all the openings and Panel joints as necessary. In one case done hit the large Green tick, so select Cut-Geometry. Make certain the void actually passes through and cuts your wall. Now merely click on the Void you but created, then on the wall yous want split:

Hit the large Dark-green Tick and finish the model. All done!

Pros:

Easy to control, You can use sketch tool to create any shaped void, Multiple openings are controlled by ane in-identify void, good for complex panel systems

Cons:

Ane continuous wall so tin't tag each panel, tin be a pain if one of the panels changes to a different thickness

---

Revit Precast Panels using Wall openings

Yous can employ Wall openings to create rectangular voids, either to divide panels (gaps) or to create window and door openings. Y'all practise this by selecting your precast wall, then selecting Wall Opening on the Modify Wall tab. This prompts you lot to create a rectangular opening, which you lot tin edit by pushing and pulling the arrows or editing the temporary dimensions.

Pros:

Pretty easy, Proficient for panels with lots of voids

Cons:

Rectangular voids only, can't use sketch tool, openings are singular so need to group together for multiple.

---

Every bit you lot tin run into there are plenty of ways to model precast panels in Revit, you could even use a combination of these methods to reach your desired result. Hopefully this blog post has given you some new insights or tempted you lot to try an alternative method for creating Precast Panels in Revit.

If you lot have any questions, or another method that's not mentioned and so delight leave a comment beneath!

If you found this mail helpful, please feel costless to share it.

-Talk soon

P.S – I'd love to connect with you on Twitter: here

Join the tribe and Subscribe!

DOWNLOAD HERE

Posted by: markcumpoing.blogspot.com